Standalone Logtool for MPE/iX

998 ****** FIELD SPECIFIED IN VARIANT CANNOT BE FOUND ( LTERR 998 )
CAUSE LOGTOOL was not able to locate the field in the record definition for which the current TAG`ID is to be used
with.
ACTION Please verify that the field number and record id number are correct. Please consult the LOGTOOL manual for
the correct usage of the VARIANT command.
1000 ****** LLIOSTAT TYPE REQUIRES 32 BITS ( LTERR 1000 )
CAUSE The FIELD`FORMAT command contained an entry with a type of LLIOSTAT and a parameter which was
not a value of 32. A Low level I/O status as defined by the MPE/iX operating system requires 32 bits.
ACTION Please consult the LOGTOOL manual for correct usage of the FIELD`FORMAT command.
1002 ****** DATE TYPE REQUIRES 16 BITS ( LTERR 1002 )
CAUSE The FIELD`FORMAT command contained an entry with a type of DATE and a length which was not a
value of 16. A datestamp as defined by the MPE/iX operating system requires 16 bits.
ACTION Please consult the LOGTOOL manual for correct usage of the FIELD`FORMAT command.
1003 ****** MPEXLSTAT TYPE REQUIRES 32 BITS ( LTERR 1003 )
CAUSE The FIELD`FORMAT command contained an entry with a type of MPEXLSTAT and a length which was
not a value of 32. An MPE/iX status as defined by the MPE/iX operating system requires 32 bits.
ACTION Please consult the LOGTOOL manual for correct usage of the FIELD`FORMAT command.
1004 ****** TIME TYPE REQUIRES 32 BITS ( LTERR 1004 )
CAUSE The FIELD`FORMAT command contained an entry with a type of TIME and a length which was not a
value of 32. A timestamp as defined by the MPE/iX operating system requires 32 bits.
ACTION Please consult the LOGTOOL manual for correct usage of the FIELD`FORMAT command.
1005 ****** LAST RECORD`ID OR TAG`ID IS NOT COMPLETE ( LTERR 1005 )
CAUSE LOGTOOL has encountered a RECORD`ID or TAG`ID command before all required information for the
previous record definition has been given. The partial record definition will be ignored.
ACTION Please consult the LOGTOOL manual for the correct format of a record definition.
1006 ****** VALUE GIVEN IN N`FIELDS CANNOT BE NEGATIVE ( LTERR 1006 )
CAUSE The number of fields for the current record definition number be equal to or greater than zero. This value
must match the number of entries given in the FIELD`FORMAT command.
ACTION Please consult the LOGTOOL manual for the correct usage of the N`FIELD command.
1007 ****** UNABLE TO COPY FILE ! TO SYSTEM DISK ( LTERR 1007 )
CAUSE LOGTOOL was not able to copy the layout files to the main system disk.
ACTION An error message containing further information will be displayed with this message. Please refer to the
ACTION clause of that error message for further information.
1008 ****** UNABLE TO FULLY QUALIFY LAYOUT FILE NAME ( LTERR 1008 )
CAUSE LOGTOOL was not able to fully qualify the file name for the layout files. LOGTOOL cannot create the layout
files with fully qualifying the file name.
ACTION An error message containing further information will be displayed with this message. Please refer to the
ACTION clause of that error message for further information.
1009 ****** LENGTH OF FIELD CONTAINING HARDWARE STATUS COUNT EXPECTED ( LTERR
1009 )
CAUSE LOGTOOL was expecting value which is the length of the field containing the hardware status count. LOGTOOL
will display a carat indicating the location where it was expecting the value.
ACTION Please consult the LOGTOOL manual for further information on the FIELD`FORMAT command.
1010 ****** INDEX TO THE FIELD CONTAINING HARDWARE STATUS COUNT EXPECTED ( LTERR