SNA NRJE User/Programmer Reference Manual (30292-90006)

Chapter 3 83
User Commands
RELEASE
RELEASE
Relinquishes access to the host remote console of a workstation.
Syntax
REL[EASE]
Description
Use this command to relinquish access to the host remote console of a
workstation. You must have NM capability or be an “allowed” console
user to use this command. You remain in the console of a workstation
until a RELEASE command is issued or until you exit from the NJRE CI.
Note that, since you cannot specify a
Wsid in this command, you can
release access to the default workstation only.
Text Reference
See CONSOLE earlier in this chapter for a general description of how to
use the host remote console. NRJERelease is the manager intrinsic
counterpart of this command; it is described in Chapter 6 , “NRJE
Manager Intrinsics.”