SNA NRJE User/Programmer Reference Manual (30292-90006)

Chapter 3 79
User Commands
NRJE
Example
: ... You are logged on to MPE.
:NRJE RMT11 Enter NRJE with RMT11 as the default workstation.
product number version number NJRE (C) HEWLETT-PACKARD CO. copyright year
NRJE WELCOME The NRJE WELCOME text is configured by an
NRJE manager.
RMT11> ... Execute NRJE commands with RMT11 as the default
workstation. The prompting string is configured
in the NMMGR Workstation Data screen.
RMT11>NRJE RMT99 Switch to RMT99 as the default workstation.
RMT99> ... Execute NRJE commands with RMT99 as the default.
RMT99>NRJE RMT11 Switch to RMT11 as the default workstation.
RMT11> ... Execute some NRJE commands with RMT11 as the default
workstation.
RMT11>EXIT Return control to MPE.
: ... Execute some MPE commands.
In the example above, you enter NRJE specifying RMT11 as the default
workstation. After executing some commands, you switch the default
workstation from RMT11 to RMT99, and then back to RMT11. Eventually,
you return control to MPE.
Text Reference
See the SNA Link Services Reference Manual or the SNA NRJE Node
Manager’s Guide for workstation configuration information. See the
SNA NRJE Node Manager’s Guide for a description of NRJE manager
commands.