SNA NRJE User/Programmer Reference Manual (30292-90006)
72 Chapter3
User Commands
EXIT
EXIT
Causes the user to exit from the NRJE command interpreter (CI) and
returns control to the process from which the CI was run.
Syntax
E[XIT]
Description
The EXIT command exits you from the NRJE command interpreter (CI)
and returns control to the process that called the CI. If you have
speciļ¬ed a default workstation (or no workstation) and then changed it
by using an NRJE command, use the NRJE command to return to the
previous workstation.
Example
Enter NRJE from MPE (in this case, without a
Wsid
parameter).
:NRJE
product number version number
NJRE (C) HEWLETT-PACKARD CO.
copyright year
WELCOME TO NRJE
Enter NRJE from within itself using RMT19 as
the default workstation.
>NRJE RMT19
Do some commands affecting RMT19.
RMT19> ...
Return control to MPE by using an EXIT command.
You do not return to an outer NRJE. If you want
to do so, you should use another NRJE command.
RMT19>EXIT
: ...
You have returned to MPE.