SNA NRJE User/Programmer Reference Manual (30292-90006)

Chapter 7 213

MPE Support Utilities and Commands

MPE Spooling Commands

Table 7-1 lists MPE commands that can be used to affect spooling.

These commands are executed from the HP 3000 system console. They

are described in the Console Operator’s Guide.

Table 7-1 MPE Spooling Commands

MPE V, and MPE XL

prior to release 2.1

MPEXLrelease 2.1

and later

ALTSPOOLFILE

SPOOLF ;ALTER Alters the characteristics of a spool ﬁle.

DELETESPOOLFILE

SPOOLF ;DELETE

Deletes a spool ﬁle.

OPENQ OPENQ Opens the spool queue for a speciﬁed

logical device or device class.

OUTFENCE OUTFENCE Selects the priority level above which spool

ﬁles can become active.

RESUMESPOOL SPOOLER ;RESUME Resumes suspended spooler output to a

spooled device.

SHUTQ

Closes the spool queue for a speciﬁed

logical device or device class.

STARTSPOOL SPOOLER ;START Initiates spooling of a device.

STOPSPOOL SPOOLER ;STOP Terminates spooling to a speciﬁed device.

SUSPENDSPOOL SPOOLER ;SUSPEND Suspends output to a spooled device.