SNA NRJE User/Programmer Reference Manual (30292-90006)

100 Chapter3
User Commands
VERSION
VERSION
Identifies the software version of SNA NRJE.
Syntax
V[ERSION]
Description
The VERSION command enables you to identify the versions of SNA
NRJE program files, segments, the message file, and the overall version
of the subsystem. Output from this command is sent to $STDLIST.
Example
R20>version
*************** NRJE VERSION CHECK ***************
PROGRAM NRJE.NRJE.SYS HAS VERSION:A6000000
PROGRAM NRJECONS.NRJE.SYS HAS VERSION:A6000000
PROGRAM NRJEMON.NRJE.SYS HAS VERSION:A6000000
PROGRAM NRJELU.NRJE.SYS HAS VERSION:A6000000
PROGRAM NSHUT.NRJE.SYS HAS VERSION:A6000000
SL SEGMENT NRJEMISCVERS HAS VERSION:A6000000
SL SEGMENT NRJEMISC2VERS HAS VERSION:A6000000
SL SEGMENT NRJEMISC3VERS HAS VERSION:A6000000
SL SEGMENT NRJEINTVERS HAS VERSION:A6000000
SL SEGMENT SUBSYS2FMTVERS HAS VERSION:A6000000
MESSAGE FILE NRJECAT.NRJE.SYS HAS VERSION:A6000000
OVERALL VERSION: A.60.00
Different versions of NRJE may have different modules installed. The
first five digits of each module's version number should match and be
reflected in the overall version level.
Text Reference
This command has the same effect as the MPE command NRJECONTROL
VERSION.