SNA NRJE Node Managers Guide (30292-90007)

94 Chapter6
Commands
NRJECONTROL STOP
An LU-LU session can also be stopped without issuing an NRJECONTROL
STOP in these ways:
• By issuing the NRJE command HALT.
• By issuing the NRJE command STOPWS.
• By issuing the MPE command NRJECONTROL HALT.
• By issuing the MPE command SNACONTROL STOP.
• By the host job entry subsystem; SNA NRJE honors the request.
This can happen at any time.
Text Reference
See NRJECONTROL HALT earlier in this chapter, and HALT and STOPWS
later in this chapter. NRJEStopWS is the manager intrinsic counterpart
of this command; it is described in the SNA NRJE User/Programmer
Reference Manual.