SNA NRJE Node Managers Guide (30292-90007)

92 Chapter6
Commands
NRJECONTROL STATUS
NRJECONTROL STATUS
Displays the current status of LU sessions.
Syntax
NRJECONTROL STATUS[;W[SID]= Wsid ][;LU= LUName [, LUName ]...]
Parameters
Wsid The workstation name. This can be up to eight
alphanumeric characters long; the first character must
be alphabetic.
If you omit this parameter, the default workstation
identifier is used. You can specify a default workstation
identifier in the NRJE command.
LUName For NRJE/V, this is the name of the SNA node LU class
whose status you want displayed. (Node classes are
configured on the MPE V SNA Configuration: Classes
screen.) For NRJE/XL, this is the configured LU Name
(not the NAU number) of the LU whose status you want
displayed. (LUs are configured on the MPE XL
SNANode Configuration: PU and LU Data screen.)
The name can be up to eight alphanumeric characters
long; the first character must be alphabetic. You can
specify a maximum of five
LUNames . If you do not
specify any
LUNames , the status is displayed for all LUs
configured for the workstation.
Description
This command displays the condition of LU sessions of a workstation.
You can specify a particular workstation by specifying a
Wsid . The
NRJECONTROL STATUS command is intended as a support tool to aid in
identifying the state of each LU for your workstation.
NOTE The output of the NRJECONTROL STATUS command is in text format,
which may vary somewhat with different releases of NRJE.
Text Reference
NRJELUStatus is the manager intrinsic counterpart of this command; it
is described in the SNA NRJE User/Programmer Reference Manual.