SNA NRJE Node Managers Guide (30292-90007)

Chapter 3 33
SNA NRJE Configuration
Configuring SNA NRJE
HP-IBM Configuration Screen
From the HP-IBM Configuration Screen you can select the item you
want to configure, see Figure 3-2.
Figure 3-2 HP-IBM Configuration Screen
To select NRJE configuration press
[f3] [Go To NRJE].
NRJE Configuration Screen
After you have selected NRJE configuration, NMMGR displays the
NRJE Configuration Screen, as shown in Figure 3-3. (You can go
directly to this screen from any screen by typing @NRJE in the command
window and pressing
[ENTER].) Here you specify information about the
new NRJE workstation you are configuring or the existing workstation
you are modifying.