SNA NRJE Node Managers Guide (30292-90007)

198 AppendixA
Result Codes and Messages
SNA NRJE Error Messages
806 MESSAGE: NO WORKSTATION IS ACTIVE. (CI=806)
CAUSE:
ACTION:
807 MESSAGE: WORKSTATION IS NOT ACTIVE. DISPLAY IS USED.
(CI=807)
CAUSE:
ACTION:
808 MESSAGE: WHEN READER FENCE IS 0, MPE SYSTEM OUTFENCE IS
USED. (CI=808)
CAUSE:
ACTION:
818 MESSAGE: NO USER, @, SPOOLFILE, OR HOST JOB SPECIFIED.
(CI=818)
CAUSE: Syntax to CANCEL was invalid.
ACTION: Re-enter CANCEL command with the correct parameters.
819 MESSAGE: NO USER, @, SPOOLFILE, OR HOST JOB SPECIFIED.
(CI=819)
CAUSE: Syntax to SHOW was invalid.
ACTION: Re-enter SHOW command with the correct parameters.
820 MESSAGE: PR SPECIFICATION MUST BE BETWEEN 1 AND 86
CHARACTERS. (CI=820)
CAUSE: An incorrect print destination was entered on a SUBMIT
command.
ACTION: A print destination specification must be between 1 and 86
characters. Correct the information and re-enter the data.
821 MESSAGE: PU SPECIFICATION MUST BE BETWEEN 1 AND 86
CHARACTERS. (CI=821)
CAUSE: An incorrect punch destination was entered on a SUBMIT
command.
ACTION: A punch destination specification must be between 1 and 86
characters. Correct the information and re-enter the data.
822 MESSAGE: FO SPECIFICATION MUST BE BETWEEN 1 AND 86
CHARACTERS. (CI=822)
CAUSE: An incorrect forms destination was entered on a SUBMIT
command.
ACTION: A forms destination specification must be between 1 and 86
characters. Correct the information and re-enter the data.