SNA NRJE Node Managers Guide (30292-90007)

Appendix A 195
Result Codes and Messages
SNA NRJE Error Messages
756 MESSAGE: WORKSTATION ID LENGTH IS NOT BETWEEN 1 AND 8
CHARACTERS. (CI=756)
CAUSE: A workstation identification length is out of range.
ACTION: A workstation identification must begin with a letter and be
eight or fewer alphanumeric characters long. Correct the information
and re-enter the data.
757 MESSAGE: WORKSTATION ID DOES NOT EXIST. (CI=757)
CAUSE: The workstation identification specified is in error, or has not
been configured.
ACTION: Verify the workstation identification desired. Correct the
information and re-enter the data.
758 MESSAGE: WARNING: NO WORKSTATION ID HAS BEEN SPECIFIED.
(CI=758)
CAUSE: There is no default workstation.
ACTION: Enter an NRJE command with a workstation identification, or
enter subsequent commands and include the workstation identification.
759 MESSAGE: NO INPUT FILE SPECIFIED FOR THE SUBMIT COMMAND.
(CI=759)
CAUSE: An input file name is required. It may be a fully qualified file
name or a file reference.
ACTION: Correct the SUBMIT command to include an input file name,
and re-enter it.
760 MESSAGE: TRANSLATION OR COMPRESSION CANNOT BE
SPECIFIED WITH DIRECT. (CI=760)
CAUSE: Translation and compression cannot be combined with the
DIRECT option.
ACTION: Revise the command to omit this combination and re-enter it.
761 MESSAGE: COMPRESSED AND UNTRANSLATED INPUT FILE IS NOT
ALLOWED. (CI=761)
CAUSE: An input file submitted with compressed and untranslated
options is not allowed. An input file must have been translated before
compression on it can be performed.
ACTION: Resubmit and specify compressed and translated for the file.
762 MESSAGE: NO NULL KEYWORD IS ALLOWED. (CI=762)
CAUSE: Two semicolons without any token between them detected.
ACTION: Re-enter.