SNA NRJE Node Managers Guide (30292-90007)

Appendix A 187
Result Codes and Messages
SNA NRJE Error Messages
614 MESSAGE: UNABLE TO OPEN $STDLIST. (SEV=614)
CAUSE:
ACTION:
615 MESSAGE: SPOOL FILE CLOSE ERROR. DEV=!, SP STATUS=!.
(SEV=615)
CAUSE:
ACTION:
616 MESSAGE: SPOOL FILE PURGE ERROR. DEV=!, SP STATUS=!.
(SEV=616)
CAUSE:
ACTION:
617 MESSAGE: SPOOL FILE READ ERROR. DEV=!, SP STATUS=!.
(SEV=617)
CAUSE:
ACTION:
618 MESSAGE: MAXIMUM ALLOWABLE CLASSES, 100, EXCEEDED.
(NRJEOUT=618)
CAUSE: Too many device classes have been indicated in the
Info
parameter of a RUN NRJEOUT command.
ACTION: Reduce the number of device classes indicated in the
Info
parameter of the RUN NRJEOUT command. Separate jobs or sessions may
be suitable.
619 MESSAGE: MAXIMUM ALLOWABLE LDEVS, 100, EXCEEDED.
(NRJEOUT=619)
CAUSE: Too many logical device numbers have been indicated in the
Info parameter of a RUN NRJEOUT command.
ACTION: Reduce the number of logical device numbers indicated in the
Info parameter of the RUN NRJEOUT command. Separate jobs or
sessions may be suitable.
620 MESSAGE: WARNING: MAXIMUM CHAIN, 100, REACHED.
(NRJEOUT=620)
CAUSE: There are too many spool files in one chain.
ACTION: Alter the host job so that fewer data sets are generated.
622 MESSAGE: NRJEOUT STACK DESTROYED BY USER PROCEDURE.
(NRJEOUT=622)
CAUSE: NRJEOutData, supplied by a user, destroyed the integrity of
data, DB through Q, in the NRJEOUT routine.