SNA NRJE Node Managers Guide (30292-90007)

Appendix A 175
Result Codes and Messages
SNA NRJE Error Messages
357 MESSAGE: THE WORKSTATION IS NOT ACTIVE. (INT=357)
CAUSE: A control command sent to the NRJE monitor could not be
processed because the monitor is not active.
ACTION: Use the STATUS command to verify the state of the
workstation.
358 MESSAGE: THE LU IS NOT ACTIVE. (INT=358)
CAUSE: A control command sent to an LU cannot be processed because
the LU is not active.
ACTION: Use the STATUS command to verify the state of the LU.
390 MESSAGE: SUBMITTED FILE RECORD SIZE EXCEEDS READER
RECORD SIZE (INT=390)
CAUSE:
ACTION:
391 MESSAGE: RECORD SIZE OF 1ST FILE SUBMITTED IS < FOLLOWING
FILES (INT=391)
CAUSE:
ACTION:
392 MESSAGE: UNABLE TO OBTAIN READER RECORD SIZE FROM IO
CONFIG (INT=392)
CAUSE:
ACTION:
401 MESSAGE: UNABLE TO UNLOCK THE NRJE EXTRA DATA SEGMENT.
(SEV=401)
CAUSE:
ACTION:
402 MESSAGE: ATTEMPT TO CREATE AN ACTIVE WORKSTATION ENTRY.
(MAN=402)
CAUSE: Attempt to start a workstation that is already active.
ACTION:
403 MESSAGE: NO AVAILABLE WORKSTATION ENTRY LEFT IN NRJE
XDS. (MAN=403)
CAUSE: NRJE allows only eight workstations to be active concurrently.
ACTION: Bring down some active workstations if other workstations
need to be started.