SNA Link/iX Node Managers Guide (30291-90009)

58 Chapter2
SNA Node and Link Configuration
Configuring the SNA Node and Link
• SNA/SDLC (independent LU): The
luname operand of the LU macro
must match this field; see Table 2-1.
• SNA/X.25 (PVC): For
troubleshooting purposes, we
recommend that the
luname
operand of the X25.LU macro match
this field; see Table 2-2.
• SNA/X.25 (SVC): For
troubleshooting purposes, we
recommend that the
luname
operand of the LU macro in the
VTAM switched major node match
this field; see Table 2-3.
• SNA/Token Ring: For
troubleshooting purposes, we
recommend that the
luname
operand of the LU macro in the
VTAM switched major node match
this field; see Table 2-7.
LU# The LU (NAU) number. Note that for
an independent LU this field
must be
blank.
Range: 1-255 (integer)
Default: Blank
Host Configuration:
• SNA/SDLC: The LOCADDR operand of
the LU macro must match this field;
see Table 2-1. Note that for an
independent LU the LOCADDR
operand must be set to 0.
• SNA/X.25 (PVC): The LOCADDR
operand of the X25.LU macro must
match this field; see Table 2-2.
• SNA/X.25 (SVC): The LOCADDR
operand of the LU macro in the
VTAM switched major node must
match this field; see Table 2-3.
• SNA/Token Ring: The LOCADDR
operand of the LU macro in the
VTAM switched major node must
match this field; see Table 2-7.