SNA Link/iX Node Managers Guide (30291-90009)

Chapter 2 57
SNA Node and Link Configuration
Configuring the SNA Node and Link
Figure 2-5 LU Data Screen Example
Fields
Path
For display only. The NMMGR path to this screen. It
includes the name of the SNA node you are configuring.
Logical Unit Data
Information about the LUs to be configured for this
node. You can configure a maximum 256 LUs for each
node.
LU Name The remote system name (
not the
Network Addressable Unit [NAU]
number) of the LU. The name can be up
to eight alphanumeric characters long;
the first character must be alphabetic.
Note that
at least one LU Name must
be specified.
Host Configuration:
• SNA/SDLC (dependent LU): For
troubleshooting purposes, we
recommend that the
luname
operand of the LU macro match this
field; see Table 2-1.