SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts

50 Chapter2
SNA Node and Link Configuration
Configuring the SNA Node and Link
Figure 2-3 SNA Node Configuration Screen Example
Fields
Path
For display only. The NMMGR branch you are in.
SNA Node Name
The name of the new SNA node you are configuring or
the existing node whose configuration you are
modifying. The name can be up to eight alphanumeric
characters long; the first character must be alphabetic.
Host Configuration:
• SNA/SDLC: For troubleshooting purposes, we
recommend that the
puname
operand of the PU macro
match this field; see Table 2-1.
• SNA/X.25 (PVC): For troubleshooting purposes, we
recommend that the
puname
operand of the X25.PU
macro match this field; see Table 2-2.
• SNA/X.25 (SVC): For troubleshooting purposes, we
recommend that the
puname
operand of the PU macro
in the VTAM switched major node match this field;
see Table 2-3.
• SNA/Token Ring: For troubleshooting purposes, we
recommend that the
puname
operand of the PU macro