SNA Link/iX Node Managers Guide (30291-90009)

260 AppendixA
Messages
LAN Error Messages
63 MESSAGE: The NIO LAN/console card detects a bind request to
already bound register.
CAUSE: The problem is caused by a link driver internal error.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard support contact.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
64 MESSAGE: The NIO LAN/console card detects an unbind request to
an unbound register.
CAUSE: The problem is caused by a link driver internal error.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard support contact.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
65 MESSAGE: The NIO LAN/console card detects too many multicast
addresses in the configuration buffer.
CAUSE: The problem is caused by a link driver internal error.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard support contact.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
66 MESSAGE: The NIO LAN/console card reports that expected
CCMD_IN or CCMD_OUT was not found.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
67 MESSAGE: The NIO LAN/console card reports that CCMD_OUT was
sent to an inbound only register set.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
68 MESSAGE: The NIO LAN/console card reports that expected
CCMD_LINK was not found.
CAUSE: Unknown. Need more information.