SNA Link/iX Node Managers Guide (30291-90009)

258 AppendixA
Messages
LAN Error Messages
50 MESSAGE: The NIO LAN/console card did not return to a ready state
after a reset was issued.
CAUSE: The problem is caused by bad NIO LAN/console hardware.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
52 MESSAGE: The NIO LAN/console card register test failed during
LAN/console card initialization.
CAUSE: The problem is caused by bad NIO LAN/console hardware.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
53 MESSAGE: Unable to obtain IODC information from
IO_GET_MODULE_REC during initialization.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard support contact.
55 MESSAGE: An unknown interrupt type was received from
IO_Services.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard support contact.
57 MESSAGE: The NIO LAN/console card detects that bind request for a
given 802.2 SAP or 802.2 SAP + XSAP or ETHERNET Type is already
bound.
CAUSE: The problem is caused by a link driver internal problem.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard support contact.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
58 MESSAGE: The NIO LAN/console card detects illegal bind request.
CAUSE: The problem is caused by a link driver internal problem.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard support contact.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.