SNA Link/iX Node Managers Guide (30291-90009)

24 Chapter1
SNA Links Overview
SNA/X.25 Link Overview
• OS/400 operating system (all SNA-related software is included
within the OS/400 operating system).
For more-specific information, contact your Hewlett-Packard sales
representative.
HP 3000 Hardware and Software Requirements
You can run SNA/X.25 Link on any HP 3000 Series 900 computer that
has at least 32MB of real memory. Depending on your system
configuration, more memory might be required. Contact your
Hewlett-Packard sales representative for more information.
SNA/X.25 Link requires this HP 3000 hardware:
• A HP 3000 Series 900 computer system.
• A block mode terminal that is supported by VPLUS, for use with the
Node Management Services (NMS) NMMGR configuration manager.
Note that since SNA/X.25 Link requires the X.25 XL System Access
product and the DTC/X.25 Network Access product, the required
hardware for those products is also required by SNA/X.25 Link. (See
the Getting Started with the DTC manual for more information.)
SNA/X.25 Link requires this HP 3000 software:
• HP 3000 Multiprogramming Executive with Integrated POSIX
(MPE/iX) operating system.
• NS X.25 System Link.
• NS X.25 Network Access.
• OpenView DTC Manager.