SNA Link/iX Node Managers Guide (30291-90009)

Appendix A 233
Messages
SNA Transport Logging Messages
MESSAGE: Subsystem = SubsysID , Error Code = ErrorCode
CAUSE: This is associated with the “INTERNAL ERROR ErrorNum IN
NODE
NodeName ” logging message (the message is described earlier in
this listing).
ACTION: Write down the SubsysID and ErrorCode , and call your
Hewlett-Packard support contact.
MESSAGE: Subsystem = SubsysID , procedure = ProcNum , error num
=
ErrorNum
CAUSE: This is part of the logging message for link errors (including
errors that occur when trying to open or close the link).
ACTION: Write down the indicated values and call your
Hewlett-Packard support contact. Note that, (1) depending on the
ErrorNum , you might have to look at a message with the corresponding
number in “X.25 Link Failure Error Codes” later in this appendix; and
(2) depending on the
ProcNum , you might have to look at a message with
the corresponding number in “X.25 Link QLLC Internal Error Codes”
later in this appendix.