SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts
Chapter 5 123
SNA Link Troubleshooting
Using NMMAINT for the SNA Links
SNA/Token Ring Link Information
The example below shows the SNA/Token Ring Link-related
information displayed when you run NMMAINT. Note that the modules
and version numbers shown below are not necessarily current for
SNA/Token Ring Link; they are shown only as an example.
HP Token Ring LAN Driver 32098-20060 module versions:
NL procedure: LAN_8025_DRIVER_VER Version: A0045054
NL procedure: LAN_8025_WRITE_VER Version: A0045010
NL procedure: LAN_MC_VER Version: A0045019
XL procedure: SUBSYS_61_FMT_VER Version: A004505D
NL procedure: LAN_LINKCONTROL_VER Version: A004505A
HP Token Ring LAN Driver 32098-20087 overall version = A.00.45
The SNA/Token Ring Link version numbers can also be displayed by
using the SNACONTROL VERSION command (see Chapter 6 , “MPE
Commands,” in this manual).