ODBCLINK/SE Reference Manual (36217-90410)

ODBCLink/SE Reference Manual Installing ODBCLink/SE on the Client PC
ODBCLink/SE
©M.B. Foster Associates Limited 1995-2000 13
Extracting the ODBCLink/SE file
From your Client PC, double click the self-extracting file.
Note: If you are installing ODBCLink/SE on a number of Client
PC’s, after extracting the files you might wish to create
installation disks by copying the extracted files onto a
diskette.
Running the SETUP program
Note: A problem associated with Microsoft ODBC 2.10 setup
causes the setup on a WindowsNT 4.0 system to install as if
it was a Windows95 system. We have therefore created two
information files to be used with the 32-bit setup program. A
batch file copies the appropriate file to odbc.inf depending
on the parameters given.
On a WindowsNT system run “infsetup wnt”
On a Windows95 systems run “infsetup w95"
The batch file will read the parameter entered and copy the appropriate file to odbc.inf. Entering infsetup with no
parameter specified will simply describe the usage but will not copy the file.
Once the above has been accomplished proceed with the setup program as follows:
Select: Start, Run. The Run window is displayed.
Type: C:\ODBCLinkSE\SETUP.EXE in the command field
Note: C:\ODBCLinkSE\SETUP.EXE is the directory the file was
extracted into.