NS3000/iX Operations and Maintenance Reference Manual (36922-90039)

Chapter 3 49
Getting Information About the Network
Displaying Connection Information
100 byte(s) from $0F0D833B : icmp_seq = 1, time = 25 ms
100 byte(s) from $0F0D833B : icmp_seq = 2, time = 23 ms
100 byte(s) from $0F0D833B : icmp_seq = 3, time = 24 ms
100 byte(s) from $0F0D833B : icmp_seq = 4, time = 24 ms
100 byte(s) from $0F0D833B : icmp_seq = 5, time = 25 ms
100 byte(s) from $0F0D833B : icmp_seq = 6, time = 24 ms
100 byte(s) from $0F0D833B : icmp_seq = 7, time = 25 ms
100 byte(s) from $0F0D833B : icmp_seq = 8, time = 24 ms
100 byte(s) from $0F0D833B : icmp_seq = 9, time = 26 ms
100 byte(s) from $0F0D833B : icmp_seq = 10, time = 25 ms
---- $0F0D833B PING Statistics ----
10 packet(s) transmitted, 10 packet(s) received, 0 % packet loss
round trip (ms) min/avg/max = 23 / 25 / 26
Example 2
This example shows an INFO string containing the IP address, and five
packets. Note that the number of bytes has been defaulted by omitting
it in the info string.
:RUN PING.NET.SYS;INFO="15.13.131.59,5"
---- PING/iX (ICMP Echo Requestor) : Version X0100003 ----
PARAMETERS INPUT:
Remote IP address in hex : $0F0D833B
Number of packets : 5
Number of data bytes : Default of 64 bytes
---- PING $0F0D833B : 64 byte packet(s), 5 packet(s) ----
64 byte(s) from $0F0D833B : icmp_seq = 1, time = 26 ms
64 byte(s) from $0F0D833B : icmp_seq = 2, time = 24 ms
64 byte(s) from $0F0D833B : icmp_seq = 3, time = 23 ms
64 byte(s) from $0F0D833B : icmp_seq = 4, time = 23 ms
64 byte(s) from $0F0D833B : icmp_seq = 5, time = 24 ms
---- $0F0D833B PING Statistics ----
5 packet(s) transmitted, 5 packet(s) received, 0 % packet loss
round trip (ms) min/avg/max = 23 / 24 / 26
Example 3
This example shows an INFO string using the default for number of
packets, a continuous stream, of five bytes each. Output is not shown.
PING will continue to send data until
[CONTROL]-Y is entered.
:RUN PING.NET.SYS;INFO="15.13.131.59,,5"
---- PING/iX (ICMP Echo Requestor) : Version X0100003 ----
PARAMETERS INPUT:
Remote IP address in hex : $0F0D833B
Number of packets : Default of continuous stream
Number of data bytes : 5