NS3000/iX Operations and Maintenance Reference Manual (36922-90039)

170 Chapter7
Commands
SHOWNMLOG
SHOWNMLOG
Displays the number and available space of the log file.
Syntax
SHOWNMLOG
Use
Available In Session? YES
In Job? YES
In Break? YES
Programmatically? YES
Breakable? NO
Capabilities NM
Discussion
SHOWNMLOG displays the number of the current NMLG file and the
percentage of available file space currently used.
The information appears in the following format:
NMLG FILE NUMBER nnnn IS mm% FULL
where nnnn is the NMLG file number and mm is the percentage of file
space used.
If network logging is disabled due to an irrecoverable error, NMS
displays the following message explaining the cause. The manager will
have to do a warm or cool start to bring up the system again.
NMLG FILE NUMBER nnnn ERROR #nn. NM LOGGING STOPPED. (NMCNERR 36)
If network logging is enabled but currently suspended due to a
recoverable error, NMS displays the following messages explaining the
cause. Once the error is corrected, the manager can then issue the
RESUMENMLOG command explained in this section.
NMLG FILE NUMBER nnnn IS mm% FULL
NMLG FILE NUMBER nnnn ERROR #mm. NMLOGGING SUSPENDED.(NMCNERR 38)