NS3000/iX Error Messages Reference Manual (36923-90041)

9
Preface
This manual contains most messages and errors generated by
NS 3000/iX subsystems for the MPE/iX 6.0 release.
What if the Error Is
Not in this Manual
If you have encountered an error that is not in this manual, here are
some ideas on how you might find the error:
• If it is an NMMGR error, or error from any of the Node Management
Services Utilities, refer to Appendix A in Using The Node
Management Services (NMS) Utilities.
• If you have PCs using NS to connect to the MPE/iX system, consult
the terminal emulator or networking manuals for your PC software
for the error.
• If you cannot find the error at all, submit an SR and call your
Hewlett-Packard representative. (See Appendix A, “Submitting an
SR.”)
Special Note MPE/iX, Multiprogramming Executive with Integrated POSIX, is the
latest in a series of forward-compatible operating systems for the
HP 3000 line of computers. In HP documentation and in talking with
HP 3000 users, you will encounter references to MPE XL, the direct
predecessor of MPE/iX. MPE/iX is a superset of MPE XL. All programs
written for MPE XL will run without change under MPE/iX. You can
continue to use MPE XL system documentation, although it may not
refer to features added to the operating system to support POSIX (for
example, hierarchical directories). Finally, you may encounter
references to MPE V, which is the operating system for HP 3000s, not
based on the PA-RISC architecture. MPE V software can be run on the
PA-RISC HP 3000 (Series 900) in what is known as compatibility mode.