NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 6 83
Virtual Terminal (VT ERROR) Error Messages
ACTION: Reestablish remote session.
MESSAGE: CANNOT ACCESS SESSION DEVICE.
34 CAUSE: The session device is either incorrectly configured, is not a
terminal, or is not accessible through the file system.
ACTION: Check the above and reattempt logon.
MESSAGE: VT INITIALIZATION FAILED.
35 CAUSE: VT could not initialize itself because of an internal error or a
resource shortage.
ACTION: Reattempt the logon; if it fails, see Appendix A, “Submitting
an SR,” of this manual.
MESSAGE: VT NEGOTIATIONS FAILED.
36 CAUSE: The remote system could not support a VT option or the two
systems have incompatible software versions.
ACTION: Verify the VT version numbers and submit an SR.
MESSAGE: VTS MESSAGE PROTOCOL ERROR.
37 CAUSE: The local and remote VT code are different versions, or a data
transmission error occurred.
ACTION: Reattempt session establishment. If the error reoccurs, verify
the version numbers using NMMAINT and see Appendix A,
“Submitting an SR,” of this manual.
MESSAGE: INVALID REMOTE NODE REQUESTED.
38 CAUSE: The node name specified is not valid.
ACTION: Check the validity of the node name and make sure that it is
installed in the Node Management Tables. If valid and installed, see
Appendix A, “Submitting an SR,” of this manual.
MESSAGE: REMOTE NOT ACCEPTING SERVICE REQUESTS.
39 CAUSE: The remote machine has no VT servers available.
ACTION: Enable/increase the number of VT servers on the remote
machine.
MESSAGE: REMOTE NOT RESPONDING, DATA SEND FAILED.
40 CAUSE: The connectionto the remote machine has failed. The session is
terminated.
ACTION: Attempt to re-logon to the remote machine.
MESSAGE: REMOTE NOT RESPONDING, RECEIVED FAILED.
41 CAUSE: The connectionto the remote machine has failed. The session is
terminated.