NS3000/iX Error Messages Reference Manual (36923-90041)

70 Chapter5
NetIPC (SOCKERRS) Error Messages
MESSAGE: PROCESS HAS NO LOCAL SOCKET DATA STRUCTURES.
84 CAUSE: IPCCHECK was called, but the user had no sockets or
destination descriptors, and therefore no data structure for retaining
error codes.
ACTION: None, but no NetIPC or protocol module errors are available.
MESSAGE: INVALID SOCKET ERROR NUMBER.
85 CAUSE: IPCERRMSG was called with an invalid NetIPC error code.
ACTION: Check the value being passed.
MESSAGE: UNABLE TO OPEN ERROR CATALOG
SOCKCAT.NET.SYS.
86 CAUSE: The error message catalog does not exist, it is opened
exclusively, or the caller does not have access rights to the file.
ACTION: Notify your operator.
MESSAGE: GENMESSAGE FAILURE; NOT A MESSAGE CATALOG.
87 CAUSE: MAKECAT was not successfully run on the message catalog.
ACTION: Notify your operator.
MESSAGE: INVALID REQUEST SOCKET DESCRIPTOR.
88 CAUSE: Internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: INVALID REPLY SOCKET DESCRIPTOR.
89 CAUSE: Internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: WOULD EXCEED LIMIT OF REPLIES EXPECTED.
91 CAUSE: Internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: MUST REPLY TO BEFORE RECEIVING ANOTHER
REQUEST.
92 CAUSE: Internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: INVALID SEQUENCE NUMBER.
93 CAUSE: Internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: NO OUTSTANDING REQUESTS.
94 CAUSE: Internal error.