NS3000/iX Error Messages Reference Manual (36923-90041)

56 Chapter4
NFT/3000 Error Messages
MESSAGE: FILE PASSWORD IS TOO LONG.
81 CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.
MESSAGE: DEVICE NAME IS TOO LONG.
82 CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.
MESSAGE: INSUFFICIENT BUFFER SPACE FOR USER REQUEST.
84 CAUSE: Probable system resource problem.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: PM CAPABILITY IS REQUIRED FOR DEBUG.
85 CAUSE: To enter debug in NFT, Privileged Mode (PM) capability is
required.
ACTION: Contact your system operator.
MESSAGE: CI COMMAND EXECUTION FAILED.
86 CAUSE: Usually accompanied by an MPE error.
ACTION: Fix the MPE error.
MESSAGE: NEW SOURCE FILE CODE OVERRIDES PREVIOUS
SETTING.
87 ACTION: None.
CAUSE: Reminder to user.
MESSAGE: INVALID FCODE.
88 CAUSE: File code contains non-numeric characters or is too large.
ACTION: The file code must be specified as a number.
MESSAGE: SM or PM CAPABILITY REQUIRED TO COPY PRIVILEGED
FILES.
89 CAUSE: The user specified a negative file code but did not have system
manager or privileged mode capability.
ACTION: Make sure that the source file is accessed from a session (or
job) whose user has system manager or privileged mode capability.
MESSAGE: INVALID DATA MESSAGE WAS RECEIVED.
90 CAUSE: Probable internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.