NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 4 55
NFT/3000 Error Messages
MESSAGE: UNABLE TO CONTACT NFT SERVER
72 CAUSE: Probable internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: UNABLE TO STORE NFT PORT ID IN PORT DICTIONARY.
73 CAUSE: Probable internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: ERROR OCCURRED WHEN SETTING UP NFT SERVER.
74 CAUSE: Probable internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: NO NFT SERVERS ARE CURRENTLY AVAILABLE.
75 CAUSE: The number of active NFT servers (set via NSCONTROL) has
reached its limit.
ACTION: Adjust the maximum number of NFT servers allowed via
NSCONTROL. If this is not possible, try to invoke NFT again as a server
may have terminated.
MESSAGE: MESSAGE FILES MAY NOT BE TRANSFERRED IN
INTERCHANGE MODE.
76 CAUSE: MPE message files cannot be transferred using any of the
options which invoke interchange mode.
ACTION: Try the transfer again without any options which invoke
interchange mode.
MESSAGE: UNABLE TO OBTAIN PSEUDO-TERMINAL FOR LOGON.
77 CAUSE: All available pseudo-terminals are in use.
ACTION: If this happens often, ask the system manager to configure
more pseudo-terminals.
MESSAGE: NFT TERMINATION FAILED.
78 CAUSE: Probable internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: LOGON ID IS TOO LONG.
79 CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.
MESSAGE: NODE NAME IS TOO LONG.
80 CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.