NS3000/iX Error Messages Reference Manual (36923-90041)

52 Chapter4
NFT/3000 Error Messages
MESSAGE: VARIABLE LENGTH RECORDS CANNOT BE DIRECTLY
ACCESSED.
46 CAUSE: The DIR option cannot be used on variable record files or with
the VAR option.
ACTION: Retry.
MESSAGE: BUFFER MANAGER ERROR.
47 CAUSE: Probable internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: ATTEMPT TO PLACE NFT SERVER BACK IN SYSTEM
ENVIRONMENT FAILED.
48 CAUSE: Probable internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: BUFFER MANAGER ERROR.
49 CAUSE: When an NFT process is initiated it attempts to place itself
into the appropriate user session (or job). The error results when this
attempt fails.
ACTION: Make sure that the sessions involving file transfer have not
been aborted. If the sessions are present, see Appendix A, “Submitting
an SR,” of this manual.
MESSAGE: INTERNAL ERROR — SEND QUEUE OVERFLOW.
50 CAUSE: Probable internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: SOURCE AND TARGET FILE ATTRIBUTES MUST MATCH.
51 CAUSE: For certain operations (such as overwrite) the attributes (data
type, file type) of both files involved must match. When they do not this
error results.
ACTION: If overwrite was attempted but the source and target files
aren't compatible, try using the replace option (REP); or use FCOPY to
copy the files.
MESSAGE: FSIZE SPEC IS IGNORED IF TARGET EXISTS.
52 CAUSE: The FSIZE option cannot be used with the OVER (overwrite) or
APP (append) option.
ACTION: None.
MESSAGE: INTERNAL ERROR — COMPLETION QUEUE OVERFLOW.
53 CAUSE: Internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.