NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 4 51
NFT/3000 Error Messages
MESSAGE: ! OVERRIDES PREVIOUS RECORD TYPE.
36 CAUSE: Either FIX or VAR was specified when the other was already
specified in the command line or globally.
ACTION: None.
MESSAGE: ! OVERRIDES PREVIOUS FILE TYPE.
37 CAUSE: Either SEQ or DIR was specified when the other was already
specified in the command line or globally.
ACTION: None.
MESSAGE: ! OVERRIDES PREVIOUS DATA TYPE.
38 CAUSE: Either BIN or ASC was specified when the other was already
specified in the command line or globally.
ACTION: None.
MESSAGE: INVALID FILE ID: !
40 CAUSE: Usually caused by blank characters in the file ID, or by
omitting a delimiter or parameter.
ACTION: Retype and reissue the command.
MESSAGE: INVALID NODE SPEC: !
41 CAUSE: Usually caused by blank characters in the node (or
environment) specification.
ACTION: Retype and reissue the command.
MESSAGE: INVALID DEVICE SPEC: !
42 CAUSE: Usually caused by blank characters in the device specification.
ACTION: Retype and reissue the command.
MESSAGE: CREATION OF IPC SOCKET FAILED.
43 CAUSE: Probable internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: NO LOGON FOR REMOTE ENVIRONMENT.
44 CAUSE: A node or environment was specified without a logon
specification and without a pre-existing remote session.
ACTION: Specify a logon string in the DSCOPY command line or
perform a DSLINE/REMOTE HELLO before issuing the DSCOPY
command.
MESSAGE: ATTEMPT TO GET SOCKET ENDPOINT FAILED.
45 CAUSE: Probable internal error.
ACTION: See Appendix A, “Submitting an SR,” of this manual.