NS3000/iX Error Messages Reference Manual (36923-90041)
50 Chapter4
NFT/3000 Error Messages
MESSAGE: INVALID RECORD NUMBER FOR RESTART ID FILE.
24 CAUSE: Record number specified for restart ID file contains
non-numeric characters or is too large.
ACTION: Retype and reissue the command with the correct record
number for the restart ID.
MESSAGE: SCHAR AND ICHAR NOT ALLOWED AS GLOBAL SPECS
25 CAUSE: SCHAR and ICHAR may not follow “+” on the command line.
ACTION: Specify these options for every transfer.
MESSAGE: INVALID RESTART SPEC.
26 CAUSE: RESTART option syntax is incorrect.
ACTION: See Using NS 3000/iX Network Services for correct syntax.
MESSAGE: FILE ID NOT ALLOWED AS GLOBAL SPECIFICATION.
27 CAUSE: File ID cannot follow “+” on command line. All other
specifications may be made global.
ACTION: Retype and reissue the command.
MESSAGE: REP(LACE) OVERRIDES APP(END) AND OVER(WRITE).
28 CAUSE: Reminds user of the consequences of issuing REP option.
ACTION: None.
MESSAGE: APP(END) OVERRIDES REP(LACE) AND OVER(WRITE).
29 CAUSE: APP(end) was specified after REP(replace) or OVER
(overwrite), therefore it takes effect during the transfer.
ACTION: None.
MESSAGE: OVER(WRITE) OVERRIDES APP(END) AND REP(LACE).
31 CAUSE: Reminds user of OVER option’s consequences.
ACTION: None.
MESSAGE: INVALID RSIZE
34 CAUSE: RSIZE specified contains non-numeric characters or is too
large.
ACTION: Retype and reissue the command with the correct RSIZE.
MESSAGE: EQUALS SIGN MUST FOLLOW !
35 CAUSE: Equals sign does not follow the SDEV, DEV, or CODE option.
ACTION: Retype and reissue the command.