NS3000/iX Error Messages Reference Manual (36923-90041)

448 Chapter19
Logging Location Codes
Net Timers Logging Location Codes
MESSAGE: Semaphore setup error
4420 CLAS0002 CAUSE: During startup initialization of the Net Timers context
memory (port data area or PDA), the system routine Cb_init reported
an error trying to clear the Net Timers semaphore. The semaphore is
required because multiple callers can access the same timer list, and
that list can pop at any time (PARM = status from Cb_init).
ACTION: Net Timers failed to start; instead it cleaned up after itself
and reported an error. Submit an SR.
MESSAGE: Starting
4440 CLAS0004 CAUSE: Net Timers is being started up (PARM = Net Timers port data
address).
ACTION: This logging is provided for information purposes only. No
action is required.