NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 19 391
Logging Location Codes
DC/LDM Logging Location Codes
ACTION: No message was sent, so the CM module may not be aware
any problem has occurred. This may affect other operations on the
network. See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Invalid CM request received in current state
17 CLAS0000 CAUSE: During error processing of an invalid write event, DC/LDM
discovered the message it was working on was not a write event
message.
ACTION: The message should have been a write event, so this indicates
an internal bug in DC/LDM. See Appendix A, “Submitting an SR,” of
this manual.
MESSAGE: Send_msg error while issuing NM reply
18 CLAS0000 CAUSE: While attempting to send an error reply message back to the
sender of an earlier Native mode trace request or HLIO request, the
system routine send_msg reported an error
ACTION: No message was sent, so the sender may not be aware any
problem has occurred. This may affect other operations on the network.
DC/LDM is still operating. See Appendix A, “Submitting an SR,” of this
manual.
MESSAGE: Invalid NM request received in current state
19 CLAS0000 CAUSE: In attempting to send an error reply message for an earlier
HLIO request, DC/LDM hit a bug because that request was not
understood by the code which sends the replies.
ACTION: The request should have been understood, so this indicates an
internal bug in DC/LDM. No message was sent, so the sender may not
be aware any problem has occurred. This may affect other operations on
the network. DC/LDM is still operating. See Appendix A, “Submitting
an SR,” of this manual.
MESSAGE: Invalid event received in current state
20 CLAS0000 CAUSE: An invalid event message was received by DC/LDM. Events
cannot be replied to, but this logs the bad state DC/LDM was in at the
time the event was received.
ACTION: If this was a read event, its buffer was freed; otherwise the
event message was ignored. DC/LDM is still operating. See Appendix A,
“Submitting an SR,” of this manual.
MESSAGE: Error in releasing CM request write buffer
22 CLAS0000 CAUSE: During error processing of an invalid write event, DC/LDM
encountered another error while trying to free the BMGR buffer
referenced by the bad write request message, but the system routine
bmgr_free_buffer reported an error.