NS3000/iX Error Messages Reference Manual (36923-90041)

380 Chapter19
Logging Location Codes
Control Process Logging Location Codes
software installation problem, a bug in the NMS subsystem, or a
corrupt NMCONFIG file; if necessary, see Appendix A, “Submitting an
SR,” of this manual.
MESSAGE: Module Deconfig Failed
689 CLAS0002 CAUSE: While shutting down Transport due to a system shutdown or a
:NETCONTROL STOP command, NETCP encountered an error trying to
delete the NETIPC Socket Registry module (PARM. (0:16) = error
location within SOCKREG.NET.SYS and PARM. (16:16) = error status
from SOCKREG).
ACTION: This error in itself was not fatal, and shutdown continued.
However, depending on the error it may not be possible to restart
Transport without first restarting the system. See Appendix A,
“Submitting an SR,” of this manual.
MESSAGE: Data dictionary error
690 CLAS0002 CAUSE: While shutting down Transport due to a system shutdown or a
:NETCONTROL STOP command, after attempting to delete the NETIPC
Socket Registry module, NETCP discovered a CM Port Dictionary entry
named "SOCKREGISTRY" had not been deleted (PARM = 32-bit port
number of the SOCKREG.NET.SYS process which failed to delete the
entry).
ACTION: This error in itself was not fatal, and shutdown continued.
However, the entry should have been deleted, and now it will not be
possible to restart Transport without first restarting the system. See
Appendix A, “Submitting an SR,” of this manual
MESSAGE: INTERNAL ERROR; No DEVS
691 CLAS0002 CAUSE: While starting an X.25 network due to a :NETCONTROL START
command, or while updating it due to a :NETCONTROL UPDATE
command, NETCP found that none of the X.25 address keys in the
Network Directory file matched any keys in the NMCONFIG file’s SVC
or PVC configurations for that X.25 network (PARM = 0).
ACTION: This error in itself was not fatal, and startup continued.
However, outbound connections cannot be initiated using this X.25
network. Stop the network and use NMMGR to ensure the address keys
in the “Additional Address” field of X.25 Network Directory entries
match “X.25 Address Key” fields in the
NETXPORT.NI.name.PROTOCOL.X25.SVCPATH (orPVCPATH)screens
of the NMCONFIG file. If this does not solve the problem, see Appendix
A, “Submitting an SR,” of this manual.