NS3000/iX Error Messages Reference Manual (36923-90041)

356 Chapter19
Logging Location Codes
Control Process Logging Location Codes
ACTION: This error in itself was not fatal, and shutdown continued.
However, the entry should have been there. If the same error occurs
again, see Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Bad status
610 CLAS0002 CAUSE: While shutting down Transport due to a system shutdown or a
:NETCONTROL STOP command, NETCP encountered an error trying to
delete the NETIPC Socket Timers module (PARM = 32-bit status
returned by the call to sk_ti_stop).
ACTION: This error in itself was not fatal, and shutdown continued.
However, it may not be possible to restart Transport without first
restarting the system. See Appendix A, “Submitting an SR,” of this
manual.
MESSAGE: INTERNAL ERROR; Module Deconfig Failed
611 CLAS0002 CAUSE: While shutting down Transport due to a system shutdown or a
:NETCONTROL STOP command, NETCP encountered an error when
trying to stop one of the general protocols (PARM = 32-bit escape code
returned by the call to the module deconfigurator that failed). Always
preceded by another error from another entity (having a different
Entity number, such as 151–160), indicating the cause of the original
failure.
ACTION: This error in itself was not fatal, and shutdown continued.
However, some system resources may be lost until the next system
restart. Inspect the previous error, and if necessary see Appendix A,
“Submitting an SR,” of this manual.
MESSAGE: INTERNAL ERROR; NM Entry
612 CLAS0003 CAUSE: While shutting down Transport due to a system shutdown or a
:NETCONTROL STOP command, NETCP encountered an error trying to
delete the NS Registry (PARM = 32-bit status returned by the call to
reg_del_register).
ACTION: This error in itself was not fatal, and shutdown continued.
However, it may not be possible to restart Transport without first
restarting the system. If necessary, see Appendix A, “Submitting an
SR,” of this manual.
MESSAGE: BUFFER MANAGER; Buffer manager error
613 CLAS0002 CAUSE: While shutting down Transport due to a system shutdown or a
:NETCONTROL STOP command, NETCP encountered an error trying to
delete its utility buffer pool (PARM = 32-bit status returned by the call
to bmgr_delete_pool).
ACTION: This error was not fatal, and network shutdown continued.
However, the amount of system memory used by the pool may be
inaccessible until the next system restart. Probably some buffers for the