NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 19 341
Logging Location Codes
Control Process Logging Location Codes
MESSAGE: INBOUND; INTERNAL ERROR; Async request from link
262 CLAS0005 CAUSE: NETCP received an asynchronous event message from the
DCLDM indicating its LAPB PSI link reported some sort of
miscellaneous warning (PARM = 16-bit internal ldev number of the
device).
ACTION: None. This is an informative message only.
MESSAGE: INTERNAL ERROR; Internal resource error
265 CLAS0002 CAUSE: While creating an NI because a specific network was starting,
NETCP encountered an error trying to create a message pool for the
new NI port (PARM = 32-bit status returned by the call to
create_pool).
ACTION: None. The network was not started. See Appendix A,
“Submitting an SR,” of this manual.
MESSAGE: INTERNAL ERROR; Configuration file error
266 CLAS0002 CAUSE: NETCP tried to search the NMCONFIG file to determine if an
NI having a specific name was configured or not, but after successfully
opening the file it was unable to close it (PARM = 32-bit status returned
by the call to nmconfclose).
ACTION: This error in itself was not fatal, and NETCP continued.
However, the NMCONFIG file may be inaccessible. Check that the
NMCONFIG file exists and is not already opened by some other user,
such as someone running NMMGR. If this is not the problem and the
message persists, see “Appendix A, “Submitting an SR,” of this manual.
MESSAGE: INTERNAL ERROR; Internal resource error
267 CLAS0002 CAUSE: While creating an NI because a network was starting, NETCP
encountered an error trying to create a new mapping table for the NI
(PARM = 32-bit status returned by the call to map_create_table).
ACTION: The network was not started. Depending on the error, it is
possible too much frozen memory is being used by the system, but this
can change with time. Use GLANCEXL or a similar utility to check
memory usage by the system. If memory is not the cause and the
problem persists even if retried after a suitable waiting period, see
Appendix A, “Submitting an SR,” of this manual.
MESSAGE: INTERNAL ERROR; Internal resource error
268 CLAS0002 CAUSE: While creating an NI because a network was starting, NETCP
successfully created a new mapping table for the NI, but then
encountered an error trying to add the NETCP entity into the table
(PARM = 32-bit status returned by the call to map_add_entity).
ACTION: The network was not started. See Appendix A, “Submitting
an SR,” of this manual.