NS3000/iX Error Messages Reference Manual (36923-90041)

318 Chapter19
Logging Location Codes
Logging Subsystems
user on $STDLIST. However these messages are displayed on
$STDLIST only if logging is enabled for the Network Services
subsystem of NS 3000/iX.
Other Network Services—such as Network File Transfer,
Program-to-Program Communication, and Remote File Access, return
error information to the user regardless of logging configuration for the
Network Services subsystem of NS 3000/iX.
Network IPC Subsystem Logging
Logging for the NetIPC subsystem (SUB0005) of the associated links
should be configured only if users on your system are writing their own
NetIPC applications with the intrinsics described in the
NetIPC 3000/XL Programmer’s Reference Manual. NetIPC subsystem
logging provides the network manager with a “system check” to
determine which NetIPC applications are operating, if any. Most
user-repairable errors are returned in the result parameter of the
NetIPC intrinsics. These error codes are listed in Chapter 5, “NetIPC
(SOCKERRS) Error Messages,” of this manual.
Logging codes for the NetIPC subsystem of the associated links are
listed in this chapter in the section called “NetIPC Logging Location
Codes.”