NS3000/iX Error Messages Reference Manual (36923-90041)

314 Chapter19
Logging Location Codes
Logging Subsystems
L2Resolve 140 Part of the process between NS Transport and SNA
Transport that provides NS over SNA/XL
functionality. (This product is obsolete.)
LAN NI 0 The network interface for the LAN connection
performs functions for IP store and forward over
IEEE 802.3 and Ethernet links.
Loopback NI 9 The network interface for software loopback performs
loopback by converting outbound messages to inbound
messages.
Mapping Table 128 A collection of procedures for the maintenance of
intranetwork routing information.
Path 113 The path resolution procedures determine the
outbound path and resources for a connection.
Point-to-Point
(Router) NI
3 The network interface for the point-to-point
connections to LAP-B devices, both direct-connect and
dial.
Probe 111 The Probe protocol is a proprietary address-resolution
protocol used to resolve nodenames on IEEE 802.3
networks.
PXP PM 105 The Packet Exchange Protocol module performs
certain internal protocol functions for Paths and
NetIPC.
PXP SIP 106 The PXP Socket Interface Port functions as a
controller for the PXP protocol. It handles the creation
of sockets and connections.
SNA NI 10 The network interface for SNA connections. (This
product is obsolete.)
TCP PM 103 The TCP protocol module is responsible for
connection-oriented protocol functions. There is one
TCP PM for each side of a connection. This protocol
handles reliable end-to-end packet transmission and
reordering.
TCP SIP 104 The TCP socket interface port functions as a controller
for the TCP protocol. It handles the creation of sockets
and connections, tracing, and other operations not
possible on the ICS.
UDP 141 The UDP module is responsible for handling
connectionless protocol functions, for transmission of
datagram packets, for applications not requiring
reliable connections.
Entity
Entity
Number
a
Description