NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 1 25
CIERR Error Messages
ACTION: Try the command again. If it fails again submit an SR See
Appendix A, “Submitting an SR,” of this manual.
MESSAGE: INTERNAL ERROR — COULD NOT STORE VTTM ID IN
DSTABLE.
5504 CAUSE: Internal resource error.
ACTION: If this happens while running a program, prep or link the
program with more stack space. If this happens after typing a
command, see Appendix A, “Submitting an SR,” of this manual.
MESSAGE: INTERNAL ERROR — COULD NOT STORE REQ. ID IN
DSTABLE.
5505 CAUSE: Internal resource error.
ACTION: If this happens while running a program, prep or link the
program with more stack space. If this happens after typing a
command, see Appendix A, “Submitting an SR,” of this manual.
MESSAGE: NO $BACK ENVIRONMENT IN THIS SESSION
5506 CAUSE: The session executing the DSLINE command does not have
$BACK environment. This session was not created using the REMOTE
command.
ACTION: None.
MESSAGE: ONLY TRACE OPTION IS ALLOWED FOR $BACK
ENVIRONMENT
5507 CAUSE: $BACK environment supports only TRACE option.
ACTION: Remove all the option except TRACE and reissue the
command.
MESSAGE: NS TRANSPORT MISSING; MUST BE INSTALLED
5508 CAUSE: NS Transport product not installed.
ACTION: Execute NETCONTROL VERSION=MOD. If an error is returned,
install or reinstall NS Transport properly.