NS3000/iX Error Messages Reference Manual (36923-90041)

18 Chapter1
CIERR Error Messages
ACTION: None (the selected environment is closed).
MESSAGE: ALL DSLINE OPTIONS BUT RESET ARE IGNORED.
5044 CAUSE: Other options besides RESET were specified in a DSLINE
command.
ACTION: None (the selected environment is closed).
MESSAGE: DSLINE OPTION OVERRIDES PREVIOUS DSLINE
OPTION.
5045 CAUSE: More than one DSLINE option was included in a REMOTE
HELLO command. The last DSLINE option is used.
ACTION: None (the REMOTE HELLO will be executed).
MESSAGE: DSLINE OPTION IGNORED.
5046 CAUSE: Both the envid and DSLINE=envid options were specified in
a REMOTE HELLO command. The envid is used to select the
environment.
ACTION: None (the REMOTE HELLO will be executed).
MESSAGE: GENERIC ENVIRONMENT ID NOT ALLOWED HERE.
5047 CAUSE: A generic environment ID (with the wild card characters @, #,
and/or ?) was used in the envid or DSLINE=envid option of a REMOTE
command.
ACTION: Correct the syntax and reissue the command. If you want to
execute a REMOTE command for a set of environments, you must issue a
separate REMOTE for each environment.
MESSAGE: NO DEFAULT ENVIRONMENT FROM PREVIOUS :DSLINE
OR :REMOTE.
5048 CAUSE: A REMOTE or DSLINE command was issued without an
environment ID or environment number, and there is no default
environment set by a previous command.
ACTION:
Insert an environment ID or number into the syntax and reissue the
command.
MESSAGE: INVALID NSCONTROL OPTION: EXPECTED START, STOP,
ABORT, SERVER, LOG, DEBUG, STATUS, AUTOLOGON, OR
VERSION.
5049 CAUSE: An unknown option keyword was found in an NSCONTROL
command.
ACTION: Correct or delete the keyword and reissue the command.
MESSAGE: TOO MANY NSCONTROL OPTIONS.
5050 CAUSE: The information in the NSCONTROL command is too large to be
sent to the DSDAD process for processing.