NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 15 161
LAN, LAN/Console, Token Ring LAN Error Messages
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: Could not get Write Initiator label.
242 CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: Could not release Write Initiator label.
243 CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: Could not open NML Gxxxx.PUB.SYS file.
244 CAUSE: The indicated log file may be opened with exclusive access.
ACTION: Wait for the program or process that has the log file opened
exclusively to close it.
CAUSE: The driver subsystem is not configured in logging
configuration.
ACTION: Use NMMGR to check logging configuration for subsystem 25
or write down the error information displayed on the console and call
your Hewlett-Packard representative.
MESSAGE: Could not close the NMLGxxxx.PUB.SYS file.
245 CAUSE: Invalid LOG ID due to configuration data corruption in the
driver's PDA.
ACTION: Write down the error information displayed on the console,
submit an SR, take a system dump and call your Hewlett-Packard
representative.
MESSAGE: Could not freeze the configuration record in memory.
246 CAUSE: Memory shortage problems are occurring.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: Could not unfreeze the configuration record in memory.
247 CAUSE: Memory problems are occurring.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: Could not send config request message.
248 CAUSE: An internal system ports problem has occurred.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.