NS3000/iX Error Messages Reference Manual (36923-90041)

154 Chapter15
LAN, LAN/Console, Token Ring LAN Error Messages
MESSAGE: The NIO LAN/console card reports unknown soft error.
90 CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: The NIO LAN/console card detects unknown I/O
command.
91 CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: The CIO bottom plane is unable to obtain buffer manager
buffer.
112 CAUSE: Buffers have not been freed or some other process has obtained
buffers reserved for the driver.
ACTION: Warmstart the system and correct the user programs. If you
are still experiencing problems, write down the error information
displayed on the console, take a system dump, submit an SR, and call
your Hewlett-Packard representative.
MESSAGE: The CIO bottom plane detects unknown reply message
from buffer manager.
114 CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: The bind request to CAM failed.
115 CAUSE: The driver is already bound to CAM.
ACTION: Write down the error information displayed on the console,
take a system dump, submit an SR, and call your Hewlett-Packard
representative.
CAUSE: The value of CIO_META_TAG was not specified in the bind
request message.
ACTION: Write down the error information displayed on the console,
take a system dump, submit an SR, and call your Hewlett-Packard
representative.
CAUSE: The hardware address in the bind request was invalid.
ACTION: Write down the error information displayed on the console,
take a system dump, submit an SR, and call your Hewlett-Packard
representative.
MESSAGE: The CIO LAN card selftest failed.
116 CAUSE: The problem is caused by bad CIO LAN hardware.