NS3000/iX Error Messages Reference Manual (36923-90041)

148 Chapter15
LAN, LAN/Console, Token Ring LAN Error Messages
MESSAGE: The NIO LAN/console card did not return to a ready state
after a reset was issued.
50 CAUSE: The problem is caused by bad NIO LAN/console hardware.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
MESSAGE: The NIO LAN/console card register test failed during
LAN/console card initialization.
52 CAUSE: The problem is caused by bad NIO LAN/console hardware.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
MESSAGE: Unable to obtain IODC information from
IO_GET_MODULE_REC during initialization.
53 CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard representative.
MESSAGE: An unknown interrupt type was received from
IO_Services.
55 CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard representative.
MESSAGE: The NIO LAN/console card detects that bind request for a
given 802.2 SAP or 802.2 SAP + XSAP or ETHERNET Type is already
bound.
57 CAUSE: The problem is caused by a link driver internal problem.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard representative.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
MESSAGE:
The NIO LAN/console card detects illegal bind request.
58 CAUSE: The problem is caused by a link driver internal problem.
ACTION: Write down the error information displayed on the console, submit
an SR, and call your Hewlett-Packard representative.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on the
LAN/console card.