NS3000/iX Error Messages Reference Manual (36923-90041)

146 Chapter15
LAN, LAN/Console, Token Ring LAN Error Messages
MESSAGE: Attempt to rendezvous with a link driver with SAP or
SAP+XSAP or Ethernet Type already being used.
32 CAUSE: The user is trying to rendezvous twice with a link driver or two
different users are using the same SAP, SAP+XSAP or Ethernet Type.
ACTION: Write down the error information displayed on the console
submit an SR and call your Hewlett-Packard representative.
MESSAGE: Attempt to separate from the driver failed.
33 CAUSE: An attempt was made to separate from the driver using console
Link ID.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: Attempt to rendezvous with the driver or separate from
the driver when the Middle Plane is in CLOSED state.
34 CAUSE: The driver shuts itself down because of a fatal hardware error
or driver internal error and the user tries to rendezvous with the driver
or separate from it.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: Bad Rendezvous ID.
36 CAUSE: An attempt was made to use a bad rendezvous ID in a process
of separating from the driver or changing its inbound buffer pool. This
may be caused by data corruption.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: Unable to rendezvous with the driver; the rendezvous
table is full.
37 CAUSE: An attempt to rendezvous with the driver failed due to running
out of free entries in the rendezvous table.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: Attempt to separate from the driver while not having
previously rendezvoused with it.
38 CAUSE: An attempt is made to separate twice from the link driver.
ACTION: Write down the error information displayed on the console
and call your Hewlett-Packard representative.
MESSAGE: Bad rendezvous info length.
39 CAUSE: Write down the error information displayed on the console
submit an SR and call your Hewlett-Packard representative.