NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 14 137
VALERR and VALWARN Messages
ACTION: Use the NMMGR utility to add the LOGGING.SUB0005 record
to the configuration file so that logging for NetIPC will be configured. At
this time logging classes 0 through 2 should also be added to the
LOGGING.SUB0005 screen. Validate the Network Transport again.
MESSAGE: THREE LOGGING CLASSES REQUIRED FOR
SUBSYSTEM 5.
103 CAUSE: There are not three logging classes configured beneath the
LOGGING.SUB0005 path in the configuration file.
ACTION: Use the NMMGR utility to add in configuration records
CLAS0000 through CLAS0002 so that all three logging classes are
configured for NetIPC. Validate the Network Transport again.
MESSAGE: NOT A VALID LOGGING CLASS FOR SUBSYSTEM 5.
104 CAUSE: Some other configuration record besides CLAS0000 through
CLAS0002 exists beneath the LOGGING.SUB0005 path in the
configuration file.
ACTION: Use the NMMGR utility to change the configuration file so
that the only records beneath the LOGGING.SUB0005 path in the
configuration file are CLAS0000 through CLAS0002. Validate the
Network Transport again.
MESSAGE: NEXT HOP IP NETWORK NUMBER DOES NOT MATCH NI
IP NETWORK NUMBER.
105 CAUSE: The network number portion of the next hop IP internet
address on the specified NETXPORT.NI.NIname.MAPPING screen is not
the same as the network's local IP internet address number.
ACTION: Use NMMGR to change the network number of either the
next hop IP internet address or the local IP internet address so that
they are the same. Validate the Network Transport again.
MESSAGE: NEXT HOP IP ADDRESS AND/OR LINK NAME DO NOT
MATCH CONFIGURED ADJACENT DESTINATION.
106 CAUSE: There is no NETXPORT.NI.NIname.MAPPING record for the
specified network which has the same destination IP internet address
and linkname as those on the specified non-adjacent mapping screen.
ACTION: Use NMMGR to change the configuration file so that the next
hop IP internet address and the linkname on the specified mapping
screen match those of an adjacent mapping screen for the same
network. Validate the Network Transport again.
MESSAGE: NO NI LINK CONFIGURED FOR THIS NETWORK.
107 CAUSE: There are no NETXPORT.NI.NIname.LINK.linkname records
in the configuration file for this non-software loopback network.