NS3000/iX Error Messages Reference Manual (36923-90041)

128 Chapter13
NSCONTROL Error Messages
MESSAGE: UNKNOWN SERVER servername.
656 CAUSE: An NSCONTROL command with a SERVER option was issued; the
indicated server name is not a defined service.
ACTION: Delete or correct the name and reissue the command. The
NSCONTROL STATUS=SERVERS command will display the valid server
names.
MESSAGE: SERVER pin DOES NOT SUPPORT DEBUG.
657 CAUSE: An NSCONTROL command with a DEBUG=pinin option was
issued, but the server selected by pin does not support the DEBUG
option.
ACTION: Correct the pin and reissue the command, or ignore.
MESSAGE: PROCESS pin NOT A SERVER.
658 CAUSE: An :NSCONTROL command with a DEBUG=pin option was
issued, but the pin is not a server process.
ACTION: Correct the pin and reissue the command, or ignore.
MESSAGE: MINIMUM SERVER NUMBER MAXIMUM SERVER
NUMBER FOR servername.
659 CAUSE: An NSCONTROL command was issued with a SERVER option
that changes the minimum and/or maximum number of servers, so that
the minimum number of servers is greater than the maximum.
ACTION: Correct the SERVER option and reissue the command. The
NSCONTROL STATUS=SERVERS command will show the current
minimum and maximum server limits for the server type.
MESSAGE: TOTAL MINIMUM SERVER NUMBERS MINIMUM PROCESS
LIMIT.
660 CAUSE: An :NSCONTROL command was issued with a SERVER option
that changes the minimum number of servers for one or more server
types, so that the total number of previously created servers exceeds
the minimum process limit. The minimum process limit prevents
previously created servers from taking up too many processes and
hindering other applications on the system.
ACTION: Adjust the minimum number of servers to fit within the
minimum process limit.
MESSAGE: MISSING DADCONF.NET.SYS CONFIGURATION FILE.
661 CAUSE: To be determined.
ACTION: Check that the JCONFJOB job has been streamed. If not, issue
the command STREAM JCONFJOB.