NS3000/iX Error Messages Reference Manual (36923-90041)

124 Chapter12
NETXPORTERR Error Messages
ACTION:
1. Consult the SHERLOCK diagnostics to determine the cause of the
link error. If no link error is indicated, see Appendix A, “Submitting
an SR,” of this manual.
2. Consult the SHERLOCK diagnostics to determine the cause of the link
error. If no link error is indicated, see Appendix A, “Submitting an
SR,” of this manual.
3. Consult the SHERLOCK diagnostics to determine the cause of the link
error. If no link error is indicated, see Appendix A, “Submitting an
SR,” of this manual.
MESSAGE: linkName DEVICE IN BOTH ADDLINK AND DELLINK
FUNCTIONS.
4205 CAUSE: The same linkname is the object of both the ADDLINK and
DELLINK option in the NETCONTROL command above. This is not
permitted.
ACTION: Do the ADDLINK and DELLINK on separate NETCONTROL
command lines when the same linkname is used for both functions.
MESSAGE: HOST—DTC CONFIGURATION MISMATCH FOR DEVICE
linkname. ENSURE HOST NAME IS CONFIGURED ON DTC.
4206 CAUSE: The host name and/or host link name is not configured for the
DTC name and card number specified with this device.
ACTION: Ensure that the DTC name and card number configured for
this device are correct. Then use the DTC Manager to add the host
name and host link name to the configuration for the appropriate DTC
and card number. Restart the DTC card.
MESSAGE: HOST—DTC VERSION MISMATCH FOR DEVICE linkname.
4207 CAUSE: The version number of the Remote Link Manager (RLM) on the
host and the version number of MARS on the DTC are incompatible.
ACTION: Ensure that the DTC name configured for this device is
correct. Contact your Hewlett-Packard support engineer to correct the
problem.
MESSAGE: X.25 CARD DOWN ON DTC FOR DEVICE linkname.
4208 CAUSE: The X.25 code must be downloaded on an X.25 card on the DTC
before the Network Transport attempts to open the link.
ACTION: Ensure that the DTC name and card number configured for
this device are correct. Using the Openview DTC Manager, download
X.25 for the appropriate DTC and card.
MESSAGE: X.25 NOT STARTED ON DTC FOR DEVICE linkname.
4209 CAUSE: The X.25 card on the DTC was reset, but X.25 was not
restarted.