NS3000/iX Error Messages Reference Manual (36923-90041)

120 Chapter12
NETXPORTERR Error Messages
MESSAGE: ALREADY STARTED.
4045 CAUSE: NETCONTROL START command issued for an already active
entity.
ACTION: None.
MESSAGE: NOT STARTED.
4046 CAUSE: The NETCONTROL STOP command was issued when the
network transport was never running.
ACTION: Check the command for correctness. If it is correct, no further
action is required.
MESSAGE: TOO MANY MESSAGES TO BE DISPLAYED.
4047 CAUSE: The NETCONTROL error reporting mechanism has encountered
more than 6 errors.
ACTION: Fix the errors displayed and try the command again. If this
error persists, submit and SR. See Appendix A, “Submitting an SR,” of
this manual.
MESSAGE: ! PROTOCOL IS NOT ACTIVE.
4048 CAUSE: Trace issued on an inactive protocol.
ACTION: Check configuration file. All protocols must be configured.
MESSAGE: THIS COMBINATION OF FUNCTIONS AND OBJECTS NOT
ALLOWED.
4049 CAUSE: Certain NETCONTROL functions and entities are mutually
exclusive and cannot be combined on the same command line. Multiples
of the same function are not allowed.
ACTION: Check NS 3000/iX Operations and Maintenance Reference
Manual for proper syntax. Correct and retry.
MESSAGE: niName NOT CONFIGURED.
4050 CAUSE: The NI named is not configured.
ACTION: Alter the configuration file appropriately, shut down the
transport, and reconfigure.
MESSAGE: NAME LONGER THAN 8 CHARACTERS.
4051 CAUSE: Usually a command line syntax error.
ACTION: Rename if necessary; retype and retry.
MESSAGE: COMMAND NOT EXECUTED DUE TO VERSION
MISMATCH.
4052 CAUSE: Missing software modules or module version number
mismatch.