NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 12 119
NETXPORTERR Error Messages
MESSAGE: NO FUNCTION KEYWORDS ENTERED.
4033 CAUSE: User typed an illegal command. Specifying an entity requires
a function to act on it.
ACTION: Check NS 3000/iX Operations and Maintenance Reference
Manual for proper syntax. Correct and retry.
MESSAGE: TRACE PREVIOUSLY ENABLED.
4034 CAUSE: Informative message.
ACTION: None.
MESSAGE: ENTITY WAS NOT TRACING.
4035 CAUSE: Informative message.
ACTION: None.
MESSAGE: VERSION ERROR: FIX NUMBERS DIFFER.
4040 CAUSE: Network Transport software module version numbers do not
match.
ACTION: Issue the NETCONTROL VERSION=MOD command to see which
numbers do not match, then see Appendix A, “Submitting an SR,” of
this manual.
MESSAGE: VERSION ERROR: UPDATE NUMBERS DIFFER.
4041 CAUSE: Network Transport software module version numbers do not
match.
ACTION: Issue the NETCONTROL VERSION=MOD command to see which
numbers do not match, then see Appendix A, “Submitting an SR,” of
this manual.
MESSAGE: VERSION ERROR: VERSION NUMBERS DIFFER.
4042 CAUSE: Network Transport software module version numbers do not
match.
ACTION: Issue the NETCONTROL VERSION=MOD command to see which
numbers do not match, then see Appendix A, “Submitting an SR,” of
this manual.
MESSAGE: VERSION ERROR: MISSING REQUIRED MODULE (S).
4043 CAUSE: Either missing software module or possible internal error.
ACTION: Issue the NETCONTROL VERSION=MOD command to find out
which module is missing.
MESSAGE: VERSION ERROR: BAD MODULE (S).
4044 CAUSE: There may be no version stamp; file label may be overwritten,
or possible bad software installation.
ACTION: See Appendix A, “Submitting an SR,” of this manual.